Donate using PayPal


Photo number:
Photo #108206

Urmston access link to TPT near River Mersey . The gap between bollards is only 1.05 metres and the distance measured diagonally is less than 1.2 metres measured at right angles it's even less at 1.05 metres. The reflective strips on the bollards are useful. These bollards have been placed close to a bend.
The spacing of these bollards does not meet the standard recommended in local transport note

From LTN 2/08
8.14.4 Bollards are the preferred method of access control for larger vehicles, spaced a minimum of 1.2 metres apart, preferably 1.5 metres. For an additional deterrent effect, they can be installed as two staggered rows with a minimum 1.2 metres between rows (see Figures 8.5 and 8.6). Bollards should ideally be placed at least 5 metres from any bend or junction, so that riders can approach them straight on. Bollards can be hazardous on unlit routes and at sites where forward visibility is restricted by the layout or by other users.

Comments reflect the views of the original submitter only.

We welcome your feedback, especially to report bugs or give us route feedback.

My comments relate to: *

Your comments: *
URL of page: *
How did you find out about CycleStreets?:
Your name:
Our ref: Please leave blank - anti-spam measure

* Items marked with an asterisk [*] are required fields and must be fully completed.